How to Take Off Lexus Is250 Door Panel

Step-by-Step Guide to Remove Lexus IS250 Door Panel

Step 1: Remove the Plastic Cover Behind the Door Handle

1. Locate the small plastic cover behind the inner door handle.
2. Use a flathead screwdriver or a plastic trim removal tool to carefully pry off the cover, exposing a Phillips head screw underneath.

Step 2: Remove the Door Handle Screw

1. With the cover removed, unscrew the Phillips head screw behind the door handle.
2. Keep the screw in a safe place for reassembly.

Step 3: Pry Off the Window Control Panel

1. Using a plastic prying tool, carefully lift the window control panel from the door without forcing it.
2. Disconnect the electrical connector from the window switch assembly and set the panel aside.

Step 4: Remove the Armrest Screws

1. Inside the area where the window control panel was, locate and remove the additional screw using a Phillips head screwdriver.

Step 5: Pop the Door Panel Clips

1. With the screws removed, detach the panel from the door by pulling it from the bottom. The panel is held by plastic clips along the edges.
2. You’ll hear the clips “pop” as they release. Be cautious to avoid breaking any clips.

Step 6: Lift the Door Panel

Carefully lift the entire door panel to remove it from the window liner track.

Step 7: Disconnect the Door Handle and Lock Cables

1. Once the door panel is loose, pull it away from the door while it’s still connected to the door handle and lock cables.
2. Disconnect the cables from the inner side of the door panel by unhooking them from the mechanism.

Step 8: Disconnect the Electrical Connectors

1. The door panel has electrical connectors for things like power mirrors or courtesy lights.
2. Unplug all electrical connectors by pressing the release tabs and pulling the connectors apart.

Step 9: Remove the Door Panel

With everything disconnected, carefully lift the Lexus IS250 door panel away from the door frame and place it in a safe area to avoid damage.

---

Reassembling the Door Panel

To reinstall the Lexus IS250 door panel, reverse the steps above. Make sure all clips are securely in place, electrical connectors are reattached, and screws are tightened appropriately.

---

Tips for Removing the Lexus IS250 Door Panel:

• Use plastic tools to avoid scratching any part of the door.
• Keep screws and parts organized to avoid losing any during reassembly.
• Handle electrical connectors with care to avoid damaging any wires or clips.